Channels | 2-Channels |
Supply power | 24VDC |
Allowable voltage range | 90% to 110% of rated voltage |
Consumption source | Max. 5W(tải max) |
Display method | Non-display type, parameter checking and setting via external device (PC, PLC, etc.) |
Input specification_TC | K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II |
Input specification _RTD | DPt100Ω, JPt100Ω, DPt50Ω, Cu100Ω, Cu50Ω, Nikel 120Ω 3-wire type (maximum allowable wire resistance: 5Ω)) |
Input specification _Analog | Voltage: 0-100mVDC , 0-5VDC , 1-5VDC , 0-10VDC
Current: 0-20mA, 4-20mA |
Sample cycling | 50ms(synchronous sampling of 2 or 4 channels) |
Measure accurancy_temp | At room temperature (23℃±5℃): (PV ±0.3% or ±1℃, take the higher value) ±1 digit Outside room temperature range: (PV ±0.5% or ±2℃, take the higher value) ±1 digit |
Measure accurancy_RTD | At room temperature (23℃±5℃): (PV ±0.3% or ±1℃, take the higher value) ±1 digit Outside room temperature range: (PV ±0.5% or ±2℃, take the higher value) ±1 digit |
Measure Accurancy_Analog | At room temperature (23℃±5℃): ±0.3% F.S. ±1 digit Outside room temperature range: ±0.5% F.S. ±1 digit |
Input option_input CT | 0.0-50.0A (primary current measurement range) ※ CT ratio=1/1000 |
Input option_input number | Plug-in input: ON - max. 1kΩ, OFF - min. 100kΩ Non-contact input: ON - max. residual voltage 0.9V, OFF - max. leakage current 0.5mA Output current: approximately 0.3mA |
Control method | ON/OFF, P, PI, PD, PID |
Output controller_Relay | 250VAC~ 3A 1a |
Output option_SSR | Max. 12VDC ±3V 20mA |
Output option | Selectable DC 4-20mA or DC 0-20mA (load resistance 500Ω or less) |
Output option _Warn | 250VAC~ 3A 1a |
| | Output RS485(Modbus RTU) |
Media_PC loader | TTL (Modbus RTUl) |
Late | Selectable DC 4-20m or DC 0-20mA (maximum load 500Ω) |
Proportional band | RTD/Thermocouple: 1 to 999℃/℉ (0.1 to 999.9℃/℉), analog: 0.1 to 999.9 digits |
Integral time | 0 to 9999 secs |
Derivative time | 0 to 9999 secs |
Controller time | Relay output: 0.1 to 120.0 seconds, SSR output: 1.0 to 120.0 seconds |
Manual reset | 0 to 100%( 0.0 đến 100.0%) |
Relay life_Mechanical | Min. 10,000,000 times |
Relay life_Electrical: | Min. 100,000 times (250VAC 3A resistive load) |
Memory retention | Approximately 10 years (non-volatile memory) |
Insulation resistance | 100MΩ(tại mức sóng kế 500VDC) |
Insulation type | Double insulation or reinforced insulation (dielectric strength between measuring input and power supply: 1kV) |
Dielectric strength | 1,000VAC 50/60Hz for 1 minute (between power connector and input connector) |
Vibration resistance | 0.75 mm amplitude from 5 to 55 Hz (for 1 minute) in each X, Y, Z direction for 2 hours |
Noise immunity | ±0.5kV surge, ±0.5kV (pulse width: 1㎲) machine-induced noise |
Ambient_temp | - -10 to 50℃, storage: -20 to 60℃ |
Ambient_humi | 35 to 85%RH, storage: 35 to 85%RH |
Standard protection | IP20 (IEC standard) |
Tools additional | Extension connector: 1, module lock connector: 2 |
Weight | Approx 250.8g(Approx 177.7g) |