Model | CR18-8DN
CR18-3DP
CR18-8DN2 | CR30-15DN
CR30-15DP
CR30-15DN2 | CR18-8AO
CR18-8AC | CR30-15AO
CR30-15AC |
Object detection distance | 8 mm | 15 mm | 8 mm | 15 mm |
Latency | Max. 20% of Detection Distance |
Standard detection target | 50×50×1mm (iron) |
Detection distance | 0~5.6mm | 0~10.5mm | 0~5.6mm | 0~10.5mm |
Power supply (Operating voltage) | 12- 24VDC(10 -30VDC) | 100-240VAC 50/60Hz (85-264VAC) |
Consumption stream | Max. 15mA | --- |
Leakage current | ---- | Max. 2.2mA |
Response frequency | 50Hz | 20Hz |
Residual voltage | Max 1.5V | Max 20V |
Influenced by temperature | Max. ±10% of Detection Distance at 20℃ ambient temperature |
Control output | Max. 200mA |
Isolation impedance | Min. 50MΩ (wavemeter level 500VDC) |
Dielectric strength | 1,500VAC 50/60Hz for 1 minute |
Concussion | Amplitude 1mm at frequency 10~55Hz (for 1 minute) in each direction X, Y, Z for 2 hours |
Collide | 500m/s2 (about 50G) in each direction X, Y, Z for 3 times |
Display | Operation indicator (red LED) |
Operating environment temperature | -25~70℃, Storage: -30~80℃ |
Operating environment humidity | 35~95%RH, Storage: 35~95%RH |
Protection circuit | Protection circuit: power surge, reverse polarity connection source calculation | Power surge protection circuit |
Protective structure | IP66 (IEC Standard) | IP65 (IEC Standard) | IP66 (IEC Standard) | IP65 (IEC Standard) |
Cable | ø4, 3-dây, 2m | ø5, 3-dây, 2m | ø4, 2-dây, 2m | ø5, 2-dây, 2m |
(AWG22, Core diameter: 0.08mm, Number of cores: 60, Isolation diameter: ø1.25) |
Material | Housing/Nut: Copper-coated Telon, Washer: Iron-coated Telon, Detection surface: Telon, Standard cable (Black): Poly-vinyl chloride (PVC), Oil-proof cable (Gray): Oil-proof poly-vinyl chloride (PVC) |
Mass | About 64g (Approx. 52g) | About 84g (Approx. 72g) |