Detection head size | M8 |
Type | Cylindrical type (with screw), shield type |
Power source type | 2-wire DC system |
Detection distance | 2m |
Set distance | 0~1.6mm |
Latency | 15% or less detection distance |
Detectable object | Magnetic metal (non-magnetic metal reduces detection distance) |
Standard detection object | Fe 8×8×1mm |
Response frequency | 1500Hz |
Power voltage | DC10~30V including ripple (page) 10% |
Leakage current | 0.8mA or less |
Output control (switching power) | 3 ~ 100mA |
Output control (residual voltage) | 3V or less (at 100mA load current, 2m wire length) |
Lights | Operation indicator light (orange) |
Action mode | NC |
Polarization | polar region |
Protection circuit | Load short circuit protection sudden absorption |
Operating temperature limits | -25 to 70℃ (no freezing or condensation) |
Storage temperature range | -40 to 85℃ (no freezing or condensation) |
Operating humidity range | 35~95%RH (no condensation) |
Storage humidity range | 35~95%RH (no condensation) |
Effect of temperature | In the temperature range from -25 to +70oC, within ±10% of the detection distance at 23oC |
Influence of voltage | Within ±15% of rated supply voltage, within ±1% of detection distance at rated supply voltage. |
Electrical resistance material | Between all live parts and housing: 50MΩ or more (at DC500V) |
Withstand voltage | Between all live parts and housing: AC1000V 50/60Hz 1 minute |
Anti-vibration | Durability: 10~55Hz double amplitude 1.5mm 2h in each direction X, Y, Z |
Shockproof | Endurance: 500m/s 2 10 times each in X, Y and Z directions |
Protective structure | IEC: IP67 Internal standards: Omron oil-resistant component evaluation standards Achieved IP67G (JIS C0920 Annex 1) IP69K (ISO 20653 standard (old DIN standard 40050 PART9)) |
Connection method | Wire drawer type (2m) |
Material | Case: Stainless steel (SUS303) Sensor surface: Polybutylene terephthalate (PBT) Tightening nut: Plated brass Nickel Toothed Washer : Iron Galvanized Code: Polyvinyl chloride (PVC) |
Accessory | Instructions for use, tightening nuts, toothed washers |