| Detection head size | M12 |
| Type | Cylindrical type (with screw), shield type |
| Power source type | 2-wire DC system |
| Detection distance | 3mm |
| Set distance | 0～2.4mm |
| Latency | 10% or less detection distance |
| Detectable object | Magnetic metal (non-magnetic metal reduces detection distance) |
| Standard detection object | iron 12×12×1mm |
| Response frequency | 1000Hz |
| Power voltage | DC10~30V including ripple (page) 10% |
| Leakage current | 0.8mA or less |
| Output control (switching power) | 3 ~ 100mA |
| Output control (residual voltage) | 3V or less (at 100mA load current, 2m wire length) |
| Lights | Operation indicator light (orange) |
| Action mode | NC |
| Polarization | polar region |
| Protection circuit | Load short circuit protection
sudden absorption |
| Operating temperature limits | -25 to 70℃ (no freezing or condensation) |
| Storage temperature range | -40 to 85℃ (no freezing or condensation) |
| Operating humidity range | 35~95%RH (no condensation) |
| Storage humidity range | 35~95%RH (no condensation) |
| Effect of temperature | In the temperature range from -25 to +70oC, within ±10% of the detection distance at 23oC |
| Influence of voltage | Within ±15% of rated supply voltage, within ±1% of detection distance at rated supply voltage. |
| Electrical resistance material | Between all live parts and housing: 50MΩ or more (at DC500V) |
| Withstand voltage | Between all live parts and housing: AC1000V 50/60Hz 1 minute |
| Anti-vibration | Durability: 10~55Hz double amplitude 1.5mm 2h in each direction X, Y, Z |
| Shockproof | Endurance: 500m/s 2 10 times each in X, Y and Z directions |
| Protective structure | IEC: IP67
Internal standards: Omron oil-resistant component evaluation standards Achieved
IP67G (JIS C0920 Annex 1)
IP69K (ISO 20653 standard (old DIN standard 40050 PART9)) |
| Connection method | Wire drawer type (2m) |
| Material | Case: Brass, nickel plated
Sensor surface: Polybutylene terephthalate (PBT)
Tightening nut: Brass,
Nickel plated Tooth washers: Iron, zinc plated
Code: Polyvinyl chloride (PVC) |
| Accessory | Instructions for use, tightening nuts, toothed washers |