Sensing type : Through-beam type(direct beam)Sensing distance : 0.1 to 5mLight source : Infrared LED(850nm modulated)Optical axis pitch : 20mmNumber of optical axes : 16Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)Control output : PNP open collectorOperation mode : Light ON/Dark ON(set by switch)
Sensing type
Through-beam type(direct beam)
Sensing distance
0.1 to 5m
Light source
Infrared LED(850nm modulated)
Optical axis pitch
20mm
Number of optical axes
16
Sensing height/Total length
300/350mm
Power supply
12-24VDC ±10%(ripple P-P: max. 10%)
Control output
PNP open collector
Operation mode
Light ON/Dark ON(set by switch)
Environment_Ambient illumination
Sunlight: Max. 10,000lx(receiver illumination)
Environment_Ambient temperature
-10 to 55℃, storage: -20 to 60℃
Connection type
Cable type(Ø3.5, 3m)
Protection structure
IP40
Environment_Ambient humidity
35 to 85% RH, storage: 35 to 85% RH
Min. sensing target
Opaque material of min. Ø30mm
Response time
Max. 6ms(frequency B selection is max. 7ms)
Material
Case: Polycarbonate/Acrylonitrile butadiene styrene, Sensing part: Polymethyl methacrylate
Cable specification
Ø3.5mm, 4-wire, 3m(emitter: Ø3.5mm, 4-wire, 3m)(AWG 24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: Ø1mm)
Weight
Approx. 620g(approx. 360g)
Flat body (13mm) area sensors with Fresnel lensHigh strength PC/ABS plastic bodyHigh-speed response time under 7ms4 configurations (optical axis : 8 to 20/detection area : 140 to 380mm)Light ON/Dark ON operation mode switchJob indicator ON/FLASHING switchBright LED indicators on emitter and receiverOperation test (emitter stop) function, mutual interference prevention functionIP40 protection structure (IEC standard)
Autonics area sensor BWP20-16P is widely used in:
Shipping and packing