| Display method | 4 digit 7 segment LED |
| Control method | ON/OFF, P, PI, PD, PID |
| Input type | Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II
RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nikel 120Ω
Analog: 0-100mV, 0-5V, 1-5V, 0-10V
0-20mA, 4-20mA |
| Sampling period | 50ms |
| Control output 1 | Relay(250VAC~ 3A) |
| Control output 2 | Relay(250VAC~ 3A) |
| Optional input | CT, Number (DI-1/2) |
| Optional output | Warning 1/2 |
| Power supply | 100-240VAC~ 50/60Hz |
| Protective structure | IP65(front panel) |
| Display Accuracy_RTD | •At room temperature(23℃±5℃):(PV ±0.3% or ±1℃, choose higher) ±1 digit
•Outside room temperature:(PV ±0.5% or ±2℃, choose higher) ±1 digit |
| Display Accuracy_TC | •At room temperature(23℃±5℃):(PV ±0.3% or ±1℃, choose higher) ±1 digit
•Outside room temperature:(PV ±0.5% or ±2℃, choose higher) ±1 digit |
| Display Accuracy_Analog | •At room temperature(23℃±5℃): ±0.3% F.S. ±1 digit
•Outside room temperature: ±0.5℃% F.S. ±1 digit |
| Display Accuracy_CT Input | ± 5% F.S. ± 1 digit |
| Delay | RTD/Thermocouples: 1 to 100℃/℉(0.1 to 100.0℃/℉) analog variable: 1 to 100 digits |
| Ratio range | 0.1 to 999.9℃/℉(0.1 to 999.9%) |
| Integral time | 0 to 9999 seconds |
| Control time | Relay output, SSR control output: 0.1 to 120.0 seconds Current output or Optional SSR control output: 1.0 to 120.0 seconds |
| Manual reset | 0.0 to 100.0% |
| Environment_Ambient temperature | -10 to 50℃, storage: -20 to 60℃ |
| Environment Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH |
| Insulation type | Double insulation or reinforced insulation (dielectric strength between measuring input part and power part: 2kV) |
| Weight | Approx. 294g(Approx. 198g) |