Hanyoung GE6-P61A Counter/Timer Installation Manual

Hanyoung's GE6-P61A counters and timers are indispensable devices in industrial automation systems. With the ability to provide precise time measurement and control solutions, this product helps improve production efficiency and ensure smooth operation in many different industries. In this article, we will delve into the GE6-P61A installation process, from initial preparation to detailed implementation steps. Understanding how to install and use counters / timers not only helps optimize the device's features, but also contributes to extending its life and minimizing risks during operation.

1. General introduction of Counter / Timer GE6-P61A

• Product: Counter / Timer GE6-P61A
• Series: GE (Discontinued) --> Replacement product line: LC series
• Display: 6 characters, allowing easy and accurate monitoring.
• Supply voltage: 100~240VAC, suitable for most electrical systems.
• Signal input: Compatible with NPN non-voltage input and PNP voltage input, ensuring flexibility in connection.
• Control output: Including 1NO Relay and 1NO + Batch Relay, providing a variety of control options.
• Connection type: Screw-in, ensuring a firm connection and easy installation.
• Dimensions: 72x36x86mm, compact design suitable for limited spaces.
The Hanyoung GE6-P61A Counter/Timer is an ideal choice for industrial applications, providing high efficiency and reliability for automation systems.

2. Specifications of GE6-P61A

Parameter

Product code		GE6-P61A
Power supply voltage		100 - 240 VAC 50 – 60Hz
Power consumption		Approx. 13.5VA (100 - 240 VAC), Approx. 5W (24 - 60 VDC), Approx. 9 VA (24 - 60 VAC)
Character height (mm)		11 (count value), 8 (set value)
Input counting speed		1 cps, 30 cps, 1 kcps, 10 kcps (ON/OFF ratio: 1:1, "H" level: 5 - 3 VDC, "L" level : 0 - 2 VDC)
Data storage		10 years
Input		CP1, CP2, RESET, BATCH RESET (excluding TOTAL) Level [H]: 4 - 30 VDC, Level [L]: 0 - 2 VDC, internal pull-up resistor for NPN/PNP connection
Minimum input signal	Counter	Minimum external reset input signal: within 0.1ms, 1ms, 20ms
	Timer	Minimum START, INHIBIT, RESET input signal: select 1 ms, 20 ms
External power supply		Max 12 V d.c 100 mA
One-shot output		0.01 - 99.99 s [OUT1, OUT2(OUT)]
Control output	Mechanical contact	Level 1	1a (OUT)
		Level 2	1a (OUT1), 1c (OUT2)
		Capacity	contact a: 250 VAC 3 A (resistive load), contact b: 250 VAC 2 A
	Transistor contacts	Level 1	2 NPN contacts (OUT, BAT.O)
		Level 2	None
		Capacity	Open collector, 30 VDC, 100 mA max.
Timer operation error		When power on: Max ±0.01% ±0.05 seconds When reset: Max ±0.005% ±0.003 seconds
Isolation impedance		Minimum 100 ㏁ (500 VDC) between live and non-live parts.
Electrical strength		2000 V a.c 60 Hz for about 1 minute (different polarities)
Noise resistant		Square wave by noise simulator (1us pulse every 16ms) ±2kV (source terminal), ±500 V (input terminal)
Vibration resistant		10 - 55 Hz, peak intensity 0.5mm, 3 axes each way about 2 hours
Shock resistance		300 m/s2, 3 axes 3 times
Relay Life	Electricity	Minimum 100 thousand times (250 VAC 2 A load resistance)
	Mechanical	Minimum 1 million times
Protective structure		IP65 (front only)
Storage temperature		-20 ^oC ~ 65 ^oC
Environmental temperature and humidity		-10 ^oC ~ 55 ^oC, 35% ~ 85% RH
Weight		138g

Code and size selection table

Advantage

•   Counter or timer function optional.
•    High speed counter.
•    1 shot output.
•    12 kinds of input modes.
•    12 kinds of start time range

3. Detailed GE6-P61A installation instructions

INPUT MODE

OUTPUT MODE

Ví dụ: Use GE6-P61A to count products
• Use encoder HE50B-8-100-3-T-24 to count pulses (replace for products)
• 12 pulses (12 products) = 1 BATCH (1 batch)
Setting:

• Press and hold 2 seconds (can be pressed to find the desired mode)

• Appear press

• Appear choose press

• Appear choose 01.00 (s) press

• Appear choose press

• Appear choose 0.01000 press

• Appear choose press

• Appear choose press …

Return to home screen to continue installation

• Press Hold for 2 seconds until you see one of the SET or BAT LEDs light up.

• Use move up and down 2 setting functions

• If the SET led lights up first, press to move to tens and units and press to adjust to value 12 (pulse/product) then press

• Press leave the BAT LED on to set the initial value = 0 then press (can be pressed if previous value is different from 0)

• Press When both SET and BAT LEDs are on, you can start counting
Note:
- • When using relative encoder, it is recommended to use the function or and adjust the input signal both the hardware on the control box body and the settings.
- • Use to move to the desired parameter value.
- • Use to increase the value from 0-9 or to change the function of the mode , parameter

• depends on the maximum resolution of the encoder.

4. GE6-P61A Counter/Timer Installation Guide Video

Conclusion
In case you need to learn more or need technical advice, please contact Amazen immediately via:
Hotline: 0934 399 068 - Sales: 0938 072 058
Email: amazen@amazen.com.vn
With a team of highly specialized technical support and sales consultants, our company is confident that it will bring customers the best shopping experience. Amazen commits that all inverter products we currently provide are genuine, 100% new, guaranteed quality and fully accompanied by CO/CQ and VAT certificates.