Detailed installation instructions for Autonics TK4S-14RR temperature controller

The Autonics TK4S-14RR temperature controller is a premium temperature control device, designed to provide precise control solutions for industrial applications. This product belongs to the TK4S series of Autonics, a leading brand from Korea, famous for its high quality and highly reliable automation products. So how to install this controller? Are there any notes when installing TK4S-14RR? Let's answer questions with Amazen through this article!

Introducing the Autonics TK4S-14RR temperature controller

Overview information about Temperature Controller TK4S-14RR

• Product code: TK4S-14RR
•    Display method: 7-segment 4-digit LED
•    Control method: ON/OFF, P, PI, PD, PID
•    Input type : Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT ), G(TT), L(IC), U(CC), Platinel II
•    Sampling cycle : 50ms
•    Control output 1 : Relay(250VAC~ 3A)
•    Optional output : Alarm 1
•    Power supply: 100-240VAC~ 50/60Hz
•    Protection structure : IP50

Outstanding advantages of temperature controller TK4S-14RR

The TK4SP-14RR temperature controller has a high sampling rate of 50ms with a display accuracy of ±0.3%. With heating/cooling control and automatic/manual control, Series TK is capable of operating with high precision. The TK series has a variety of size and input/output options, providing precise and stable temperature control of industrial applications.
•    High sampling rate of 50 ms and display accuracy of ± 0.3%
•    High brightness LED display with large PV and SV characters
•    Simultaneous heating and cooling control function
•    Auto / manual control options
•    Switch between current output and SSR control output
•    SSRP control function (SSRP): ON / OFF control, cycle control, phase control
•    Communication output model: RS485 (Modbus RTU)
•    Parameter setting via PC (RS485 communication)
•    Supports DAQMaster software (integrated device management software)
•    Communication converters sold separately: SCM-US (USB to serial converter), SCM-38I (RS232C to RS485 converter), SCM-US48I (USB to RS485 converter)
•    User-friendly specifications
•    Hide parameters: Hide unnecessary or rarely used parameters
•    User parameter group: group frequently used parameters for easy access and settings
•    Variety of input types and temperature ranges
•    Thermostat disconnection alarm function (CT input)
•    Line converter (CT) sold separately: CSTC-E80LN, CSTC-E200LN, CSTS-E80PP
•    SV preset function (up to 4 setting values) using digital inputs
•    A variety of DIN sizes: (48 x 24, 48 x 48, 72 x 72, 96 x 48, 48 x 96, 96 x 96 mm)
•    Terminal protective cover sold separately: R◻A-COVER (except TK4N, TK4SP)

Technical specifications of TK4S-14RR

-  Display method:    7-segment 4-digit LED
-  Control method: ON/OFF, P, PI, PD, PID
-  Input type:
•   Thermocouple: K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G( TT), L(IC), U(CC), Platinel II
•    RTD: DPt100Ω, DPt50Ω, JPt100Ω, Cu100Ω, Cu50Ω, Nickel 120Ω
•    Analog: 0-100mV, 0-5V, 1-5V, 0-10V,0-20mA, 4-20mA
- Sampling cycle: 50ms
- Control output 1: Relay(250VAC~ 3A)
- Control output 2: Relay(250VAC~ 3A)
- Optional output: Alarm 1
- Power supply: 100-240VAC ~ 50/60Hz
- Protection structure: IP50
- RTD display accuracy:
•    At room temperature (23℃±5℃):(PV ±0.3% or ±1℃, choose higher) ±1 digit
•    Outside room temperature:(PV ±0.5% or ±2℃, choose higher) ±1 digit
•    For TK4SP Series, increase by ± 1 ℃ .
- TC display accuracy:
•    At room temperature (23℃±5℃):(PV ±0.3% or ±1℃, choose higher) ±1 digit
•    Outside room temperature:(PV ±0.5% or ±2℃, choose higher) ±1 digit
•    For TK4SP Series, increase by ± 1 ℃ .
- Analog display accuracy:
•    At room temperature(23℃±5℃): ±0.3% F.S. ±1 digit
•    Outside room temperature: ±0.5℃% F.S. ±1 digit
- CT Input display accuracy: ± 5% F.S. ± 1 digit
- Hysteresis: RTD/Thermocouples: 1 to 100℃/℉(0.1 to 100.0℃/℉) analog variable: 1 to 100 digits
- Scale range: 0.1 to 999.9℃/℉(0.1 to 999.9%)
- Integral time: 0 to 9999 seconds
- Generation time: 0 to 9999 seconds
- Control time: Relay output, SSR control output: 0.1 to 120.0 seconds Current output or optional SSR control output: 1.0 to 120.0 seconds
- Manual reset: 0.0 to 100.0%
- Environment Ambient temperature: -10 to 50℃, storage: -20 to 60℃
- Environment Ambient humidity: 35 to 85%RH, storage: 35 to 85%RH
- Insulation type: Double insulation or reinforced insulation (dielectric strength between measurement input part and power part: 2kV)
- Weight: Approx. 130g(Approx. 85g)

Product code selection table TK4S-14RR temperature controller

1: Select controller size

2: Select input/output

3: Select the power supply

4: Select control output OUT1

5: Select control output OUT2

Instructions for installing the Autonics TK4S-14RR temperature controller

Set parameters for controller TK4S-14RR

Hướng dẫn đấu nối bộ điều khiển nhiệt độ TK4S-14RR

- After starting the controller, if the PV value is less than the SV value, the OUT1 light on the main screen will light up, and if the PV value is greater than the SV value, the OUT2 light will light up.
- There are 5 groups of setting parameters from group 1 to group 5 and hold down mode for 3 seconds to enter the parameter groups.
Parameters group 1 (Par 1):

Symbol above main screen	Meaning
	RUN/STOP control output
	Number of multi-students
	Monitor current Heater
	Alarm output low limit setting value1
	Alarm output high limit setting value1
	Setting value (SV)-0

Group 2 parameters (Par 2):

Symbol above main screen	Meaning
	Auto-tuning RUN/STOP
	Heating ratio range
	Cooling ratio range
	Heating integration time
	Cooling integral time
	Differential Heating time
	Differential Cooling Time
	Strip not working

Parameters of group 3 (Par 3):

Symbol above main screen	Meaning
	Input type
	Temperature Sensor Unit
	Calibrate the input
	Control output operating mode
	Control type
	Heating control time
	Cooling control time

How to select input type:

Parameters of group 4 (Par 4):

Symbol above main screen	Meaning
	Alarm output operating mode1
	Select Alarm Output1
	Delay Alarm output1
	Media address
	Communication speed
	Communication Bit Parity
	Communication Bit Stop
	Media response timeout
	Record media

Select alarm output warning operating mode:

Lựa chọn chế độ hoạt động cảnh báo ngõ ra alarm

Warning options:

Parameters of group 5 (Par 5):

Symbol above main screen	Meaning
	User level
	Lock SV settings
, , , ...	Parameter keys
	Set password

Steps to adjust warning mode parameters for temperature controller TK4S-14RR:

Step 1: Select probe type, temperature measuring unit, control mode and output operation for the controller.

• Press and hold MODE to enter parameter group 3

• Press the MODE key to move to and use the arrow keys to select the PT100 probe type , then press MODE to save the selection.

• Press MODE to enter and select the temperature measurement unit , press MODE to save.

• Press MODE to enter and select the control output operating mode as , press MODE to save.

Step 2: Select the alarm operating mode

• Press and hold MODE to enter group 4

• Press MODE to enter and select the deviation high limit warning mode , press MODE to save.

Step 3: Set the deviation value and observe the alarm output.

• Press and hold MODE to enter group 1

• Press MODE to enter , then set the high deviation value to 20.

• Press and hold MODE to return to the main screen and compare PV and SV values.

• Then increase or decrease the PV temperature through the PT100 probe and the warning output when the PV - SV value is greater than or equal to 20, the warning light will light and vice versa.

Step 4: Select other alarm operating modes.

• Similar to step 2, enter and move to to select other warning modes.

• Then enter , to set high/low deviation values, high/low limit absolute value at parameter (alarm 1_low) and (alarm1_high).

• Adjust PV values to compare with SV, and observe warning light operation.

• Deviation high/low limit warning mode:

• Absolute value low limit warning mode:

Video instructions for installing Autonics TK4S-14RR temperature controller

Refer to the TK4S Manual Vietnamese document from the manufacturer Autonics:

Above are our instructions on how to use and install the Autonics TK4S-14RR temperature controller. Hopefully this information will be useful to you in the process of learning and using this device.
In case you want to buy the TK4S-14RR Temperature Controller or have any questions or need further advice, don't hesitate to contact Amazen via:

Hotline: 0934 399 068 - Sales: 0938 072 058
Email: amazen@amazen.com.vn

With a team of highly specialized technical support and sales consultants, our company is confident that it will bring customers the best purchasing experience.
Amazen commits that all temperature controller products that we currently offer are genuine, 100% brand new, quality guaranteed and fully accompanied by certification documents.