FOX-1004N temperature controller installation instructions

The FOX-1004N temperature controller is one of the outstanding devices in the field of automation, designed to bring precision and stability to temperature control applications. With outstanding features and flexible installation capabilities, the FOX-1004N is not only suitable for industrial systems but also meets many different fields. In this article, Amazen will guide you in detail on how to install the FOX-1004N temperature controller, helping you easily set up and use the device most effectively. Let's explore the steps from preparation to calibration to ensure optimal system operation and durability over time.

1. Overview of FOX-1004N temperature controller

•   Product code: FOX-1004N
•    Sensor: NTC 10K 2m long wire
•    Control method: Relay contact
•    Temperature measurement range: -40.0°C ~ +80.0°C
•    Power supply: 230VAC
•    Frequency: 50/60 Hz
•    Function: Temperature control

Bộ điều khiển nhiệt độ FOX-1004N Conotec

See more detailed specifications at: Conotec FOX-1004N Temperature Controller

2. Function component keys

3. FOX-1004N Installation Guide

Sensor control setup procedure (Program setting)

There are some modes to note when installing such as:

(TYP): cooling / heating (

) (°C)

(DIF): temperature compensation function (temperature difference)

🡪 It is necessary to divide the temperature ranges appropriately to protect the controller.

(DLT): Output delay time (sec/min)
• Display: 0.05 = 5 seconds
• Display: 1.00 = 1 minute
(This parameter may vary depending on the intended use)

(COR): Corrected Temperature (This parameter may vary depending on the intended use)

Examples of FOX-1004N temperature controller

Example 1: Heating mode
Wiring diagram

Sơ đồ đấu nối FOX-1004N ở chế độ làm nóng

•   The green light is on when the temperature is below 55°C.
•    The red light is on when the temperature is above 55°C.
Set heating mode settings
•   Press SET for more than 5 seconds to select program mode
•    See tYP press SET to select UP or DOWN to select heating mode HEt press SET
•    See dIF press SET to select 0.1 press SET
•    See Cor press SET to select 0.0 press SET
•    See LoC press SET to see oF select UP or DOWN to see on
•    Press SET to see tYP wait 30 seconds to save the program and return to the temperature display screen.
(During setup, values are returned after 30s if no further action is taken)

Temperature setting
• Press SET, the screen flashes. Press UP or DOWN to increase/decrease the output temperature value to 55°C.
• Press SET to see

setup complete
Use a probe to check the temperature

Example 2: Cooling mode
• Temperature below 15 °C the red light is on.
• Temperature above 15 °C the green light is on.
Wiring diagram (used with the diagram in example 1)

Sơ đồ đấu nối FOX-1004N ở chế độ làm lạnh

Set the cooling mode settings
•   Press SET for more than 5 seconds to select program mode
•    See tYP press SET to select heating mode CoL press SET
•    See dIF press SET to select 0.1 press SET
•    See Cor press SET to select 0.0 press SET
•    See LoC press SET to see oF select UP or DOWN see on
•    Press SET to see tYP wait 30 seconds to save the program and return to the temperature display screen.
(During the setup process, the values return after 30s if there is no further operation)
Temperature setting
•   Press SET, the screen flashes --> Press UP or DOWN to increase/decrease the output temperature value to 15°C.
•   Press SET to see

setup complete.
Use a probe to check the temperature
During operation if encountered:

: in case of interference or data damage inside the control box
• There is a limit on interference
• If interference is more than 2KV, the control box will be damaged

: sensor error
• When you want to switch from cooling 🡪 hot or hot 🡪 cold mode, you need to turn off the previous mode.
For example, FOX-1004N is switching from heating mode to cooling mode but has not turned off the heating mode before, you will not be able to set the cooling mode.
Example of how to turn off heating mode and switch to cooling mode
• Press SET for more than 5 seconds to select the program mode
• See tYP press SET to select heating mode HEt press SET
• See dIF press SET to select 0.1 press SET
• See Cor press SET to select 0.0 press SET
• See LoC press SET to see on select UP or DOWN to see oF
• Press SET to see tYP wait 30 seconds to save the program and return to the temperature display screen.
After 30 seconds the screen displays the temperature, now you can set the cooling mode
🡪 An example of how to turn off the heating mode is to turn off the cooling mode
• In heating mode, the output temperature is higher than the room temperature.
• In cooling mode, the output temperature is lower than the room temperature.
🡪 Pay attention to the temperature set at the output.

3. Detailed video tutorial on how to install FOX-1004N

4. Practical application of FOX-1004N

The FOX-1004N temperature controller is widely used in many industrial and civil fields thanks to its accurate and reliable temperature control. Here are some common practical applications:
•    Manufacturing industry: FOX-1004N is used in heating and cooling systems, helping to ensure stable temperatures in food, plastic, textile, and electronics production lines.
•    HVAC systems: Equipment that supports temperature control in heating, ventilation, and air conditioning systems, ensuring optimal performance and energy savings.
•    Laboratory applications: Used in laboratory and research equipment, such as incubators, furnaces, and temperature testing systems.
•    Food processing industry: Helps maintain accurate temperatures in ovens, bakeries, and other processing equipment, ensuring product quality.
•    Agriculture: Supports temperature control in greenhouses, incubation systems, and other temperature management applications. With its outstanding features and diverse application capabilities, the FOX-1004N temperature controller is the ideal solution for those looking for stability and efficiency in temperature management.

5. Conclusion

In case you need to learn, need technical advice and order FOX-1004N, please contact Amazen immediately via:
Hotline: 0934 399 068 - Sales: 0938 072 058
Email: amazen@amazen.com.vn
With a team of highly specialized technical support and sales consultants, our company is confident that it will bring customers the best shopping experience.
Amazen commits that all inverter products we currently provide are genuine, 100% new, guaranteed quality and fully certified with CO/CQ and VAT.