Dimensions | 96(W) X 48(H) X 68(D) mm |
Capacity | 100 － 240 V 50/60 Hz |
Input signal | DC current |
Input range | 5A / 2A 500mA / 200Ma 50mA / 4-20mA 5mA / 2mA |
AC measurement method | AVG / RMS selective measurement |
Input sampling period | 50 ms |
Input sampling method | OVER sampling method using continuous approximation A/D converter |
Frequency measurement range | 0.2 ~ 9999 Hz (Frequency measurement range depends on decimal point position) |
Display | • Negative－LCD
• 4 digits 2 rows
• PV (White)
• SV (Green) |
LM3 character size | 17,6 X 10,6 mm |
Maximum display | － 9999 ~ 9999 |
Visibility | • [ 23 °C ± 5 °C ] － F.S. ± 0,1% rdg ± 2 degit • [ 23 °C ± 5 °C, 5 A ] － F.S. ± 0,3% rdg ± 3 degit • [ 50 °C ~ － 10 °C ] － F.S. ± 0,5% rdg ±3 degit |
Control output | • Contact output: 3-phase, SPST (1a), 250 V 5 A
• Solid-state output: 3-phase, NPN or PNP open collector, 12 – 24 V 50mA or less |
Relay life | • Electrical (approximately 100,000 times, 250 V 5 A)
• Mechanical (approximately 5 million times) |
Optional output | • Transmission output (4－20 mA)
• RS－485 output |
External input | • HOLD/ZERO Optional Input
• No-voltage input
• Short-circuit impedance: 300 Ω or less
• Residual voltage: 1 V or less
• Open impedance: 100 kΩ or more |
Communication | • Communication protocol: Modbus－RTU
• Communication method: RS－485 (2－wire half duplex)
• Communication speed: 2400 / 4800 / 9600 / 19200 / 38400 bps |
Insulation | 100 mΩ or more (Mega 500 V standard, between conductive terminal and case) |
Withstand voltage | 2000 V 60 Hz 1 min (between conductive terminal and case) |
Noise | ± 2 kV (Between active power terminals, Pulse width = 1 us, Square wave noise due to noise simulator) |
Vibration resistance | 10 － 55 Hz, Single Amplitude 0.5 mm, 3 Axis Angle, 2 Hours |
Protective structure | • IP66 (front)
• Terminal block protection cover applied |