Specification
- The company's GDC Parker pneumatic cylinder with round body and square base is a mass produced and widely used product.
- Parker's popular square base monolithic cylinder
- The body and base are connected together thanks to an air-leakage gasket.
- The body shell is made of aluminum tube and is assembled into 2 bases with 4 round braces fixed.
- The front and rear base of the square cylinder is made of cast aluminum.
- There are many types of mounting accessories for GDC cylinders and are optional depending on the purpose of use.
Specifications
Bore size (mm) | Unit | Φ40 | Φ50 | Φ63 | Φ80 | Φ100 | Φ125 | Φ150 |
| Solvent | | Pneumatic |
| Operating pressure | Mpa(bar) | 0.1 – 0.9 MPa ( 1 – 9 bar) |
| Destructive pressure | Mpa(bar) | 1.5 MPa (15 bar) |
| Temperature range | °C | 5-60°C |
| Reduce speed | mm/s | 50-500 |
| Damping type | | Air shock absorber |
| Travel tolerance | | 1 – 250 +1.0/0, 251 – 1000 +1.5/0, 1001 – 1500 +2.0/0 |
| Jig type | | Tail, plate style, clevis style, trunnion style |
Tiêu chuẩn hành trình
Cách chọn mã xy lanh khí nén GDC Parker Series
Brief explanation of notes:
1. Model – product code and type and model
GDC – Type 2 impact
GDCN – 2-shaft type without inside the cylinder
2. Mounting type Mounting type – Types of cylinder mounting fixtures
LB, FH, FC, TH, TC, TM, TDH, TDC, TDM, TSH, TSC, TSM, CA, CB…
3. Bore size – Bore size of the cylinder
40, 50, 63, 80, 100, 125, 150 mm
4. Cylinder Type – Blank is standard – P is oilless
5. Stroke
The stroke of the GDC Parker Series pneumatic cylinder is according to the standard stroke table
6. Rod option – Blank Is no option
I is an I knuckle which is an i type accessory that attaches to the end of a shaft
Y Knuckle is a Y-style accessory that attaches to the shaft end
J Bellow
C is coil scraper
7 Type switch
Blank sensor type is without sensor
A54 is sensor CL-D-A54
8. Number of switch Number of switches
Detailed structure of GDC Parker Series pneumatic cylinders and dimensions
Note the structural parts of the cylinder
1. Piston Rod – Cylinder piston shaft – Carbon Steel
2. Slip Ring – Slip ring – Carbon Steel
3. Piston – Cylinder piston – Aluminum
4. Magnet – Magnetic ring
5. O – Ring – Washer – NBR
6. Hex Nut – Ecu for piston tail – Carbon Steel
7. Piston Packing - Piston retaining groove - NBR
8. Head Cover – Cylinder head cover – Aluminum
9. Cushion Packing - Cylinder damping - Urethane
10. O – Ring – NBR ring
11. Tube – Tube body of cylinder – Aluminum
12. Rod Cover – Cylinder base cover – Aluminum
13. Rod Seal & Wiper – Shaft gasket and seal – NBR
14. Rod Bush - Shaft end dust cover
15. Waher – Carbon Steel
16. Tie Rod – Ti rod connecting 2 cylinder parts – Carbon Steel
17. Nut – E cu – Carbon steel
18. Cushion Needle – Damping adjustment part – Carbon steel
19. O-Ring – gasket – NBR
20. Hex Nut – Nut – Carbon steel
Detailed dimensions of the cylinder
Sensor specifications
Sensor parameters CL-D-A54
- Voltage: DC24V/ AC110V/ AC220V
- Current: 5-100mA, 5-40 mA, 5-20 mA
- Voltage drop: 2.4 V
- Number of sensor wires: 2 wires
- Temperature range: 0 -60 degrees Celsius
- Protection level: IP67
- Sensor light: red LED