I) TECHNICAL SPECIFICATIONS OF CONOTEC FOX-1H HUMIDITY CONDITIONER
Conotec FOX-1H humidity controller includes typical parameters:
Technical specifications of FOX-1H humidity control meter
Product code | FOX-1H |
Operating humidity range | 20~90%RH |
Dimensions (mm) | 77(W) × 35(H) × 77(D) |
Hole size (mm) | 71(W) × 29(H) |
Transducer type (sensor) | HS220 (3 meter long cable) |
Display method | 7-segment 3-digit LED |
Correct display | ±1% RDG ± 1 digit |
Error | ±1%~±9% |
Control method | ON/OFF control |
Control output | Relay (250VAC ~ 2A) |
Power supply | 230VAC 50/60Hz (other power sources: 12V or 24V AC/DC ±10%) |
Program setting | Use the Set/Up/Down keys |
Environment_Ambient temperature | 0 to 55℃ (32 to 131OF) |
Environment Ambient humidity | 35 to 80% RH |
Certificate/Certificate | CE |
Weight (Including box) | 312g |
Guarantee | Genuine 12 months |
II) OVERVIEW OF CONOTEC FOX-1H HUMIDITY CONTROLLER
The Conotec FOX-1H humidity controller has a humidity range of 20% to 99%, with a relatively low deviation of ±1%~±9%. High brightness 7-segment 3-digit LED display with large characters helps users easily read the parameters displayed by the device.With this humidity controller, it helps to not only measure but also completely control humidity.
- Operating humidity range: 20~90%RH
Dimensions WxDxH: 77×35×77 (mm)
Display method: 7-segment 3-digit LED
Control method: ON/OFF control
Control output: 1 Relay (250VAC ~ 2A)
Power supply: 230VAC 50/60Hz (other power source: 12V or 24V AC/DC ±10%)
Advantages of the Conotec FOX-1H humidity controller:
- FOX-1H is designed with compact size and easy installation
Comes with 1 HS220 probe sensor with 3m long cord
Accurate display, low error: ±1% RDG ± 1 digit
Possesses the function of controlling dehumidification or humidification
Correctly calibrates current humidity
Obtained certification: CE
Operating principle of Conotec FOX-1H humidity controller:
The operating principle of the Conotec FOX-1H humidity controller can be understood as follows:
- The HS220 sensor head will be exposed to the environment, the signal will be transmitted to the processing unit, calculating and determining the humidity level at the point of contact. The results will be displayed on the LED screen.
Then the FOX-1H controller will trigger the output if the measured environmental humidity exceeds the set value (Can be triggered when within the delay range without needing the set value - if the user has set set delay band).
Conotec FOX-1H humidity controller dimensions:
FOX-1H has external dimensions of WxDxH: 77×35×77 (mm)
And the cabinet face hole size is: 71(W) × 29(H) mm
The FOX-1H humidity controller and other humidity controllers from Conotec are all designed with a compact size, helping to maximize installation & working space.
The FOX-1H humidity control meter is manufactured by Conotec which is a Korean international company. Conotec was founded in 1990 and has now become one of the leading manufacturers in the field of technology, electrical equipment, and automation equipment. The most commonly used and trusted products of this brand in Vietnam are temperature & humidity controllers, temperature sensors, and temperature control clocks.
Conotec FOX-1H humidity controller wiring diagram:
How to connect FOX-1H:
- Black wire of the probe: connected to number 1 of FOX-1H
- White wire of the probe: connects to number 2 of FOX-1H
- Yellow wire of the probe: connected to number 3 of FOX-1H
- Main source: on pins 11 and 12
- Power supply to the common pin of the relay (output): use a short piece of wire connected from pin 11 to number 9
- Load (humidifier, dehumidifier, ...): on pins 10 and 12
Refer to the article: Instructions for using the Conotec FOX-1H humidity controller to get the most accurate wiring and settings.
III) CONOTEC MOISTURE CONTROLLER PRODUCT SELECTION CODE
Conotec currently offers 3 humidity control meter codes: FOX-1H; FOX-1SH and FOX-1SHR. The next 4 columns will be information about the type of Control Output; Sensor probe type and device operating temperature and humidity range.
IV) APPLICATION OF CONOTEC FOX-1H MOISTURE CONTROLLER
The Conotec FOX-1H humidity controller is commonly used in agricultural farming models such as greenhouses, farms and laboratories, etc. The most notable differences include:
- Humidity control application for vegetable growing, flower growing, orchid growing
Spray mist to create humidity to cool the bird's nest house
Humidity control for mushroom houses
Humidity control for offices, warehouses, and factories
Turn on automatic lighting at night
Refer to FOX-1H Manual English version
Contact now to buy the Conotec FOX-1H Humidity Controller and other Conotec Heat Meters at Amazen:Sale: 0938 072 058 | Hot line: 0934 399 068 | Email: amazen@amazen.com.vn
Mã :