I) TECHNICAL SPECIFICATIONS OF CONOTEC FOX-1PH TEMPERATURE CONTROLLER
Conotec FOX-1PH temperature controller includes typical parameters:
Product code | FOX-1PH |
Dimensions (mm) | 77(W) × 35(H) × 77(D) |
| Hole size (mm) | 71(W) × 29(H) |
| Active heat range | -50.0~400℃ |
Input sensor type | Sensor probe type PT100Ω - Probe is not included in the product box |
Display method | 7-segment 3-digit LED |
Correct display | ±1% RDG ± 1 digit |
| Error | ±10C ~ ±90C |
Control method | Control Relay ON / OFF |
Control output | 1 Relay (1C 250VAC ~ 3A) |
Power supply | 100-240VAC~ 50/60Hz |
Function | - Cooling or heating control
Adjust the output delay time
Calibrate current temperature
|
Program setting | Use 3 keys Set/Up/Down |
Environment_Ambient temperature | 0~55℃ (32~131℉) |
Environment Ambient humidity | 35~80%RH |
Guarantee | Genuine 12 months (excluding sensor) |
Weight (including box) | 143g |
II) OVERVIEW OF CONOTEC FOX-1PH TEMPERATURE CONTROLLER
Conotec FOX-1PH temperature controller has a temperature range from -500C to 4000C, uses a PT100Ω type probe (sensor not included), relatively low deviation from ±10C ~ ±90C. Bright LED display with large characters makes it easy for users to read data.
Main function:
- Using cooling and heating controls
Adjust the output delay time
Calibrate current temperature
Main parameters:
- Temperature range -50.0~400℃
Probe (sensor) CA(K)
Output 1 Relay (1C 250 VAC 2A)
ON/OFF control method
Power source 100~240VAC 50/60Hz
Screen interface of FOX-1PH
Advantages of Conotec FOX-1PH:
- Small size, easy to install, designed with compact size to save maximum installation space
The PT100Ω sensor probe can withstand high temperature ranges
High sensitivity, fast display results, accurate display, low error: ±1% RDG ± 1 digit
Simple structure and connection
High durability, saves replacement costs, significantly reduces factory costs when using multiple controllers
Operates in harsh environments
Obtained certification: CE
FOX-1PH with PT100 temperature probe
Conotec FOX-1PH temperature controller dimensions:
FOX-1PH has external dimensions of WxHxD: 77 × 35 × 77 (mm)
And the installation hole size is: 71(W) × 29(H) mm
The FOX-1PH temperature controller and other Conotec temperature controllers are all designed with a compact size, helping to maximize installation & working space.
The FOX-1PH temperature control meter is manufactured by Conotec which is a Korean international company. Conotec was founded in 1990 and has now become one of the leading manufacturers in the field of technology, electrical equipment, and automation equipment. The most commonly used and trusted products of this brand in Vietnam are temperature & humidity controllers, temperature sensors, and temperature control clocks.
FOX-1PH heat meter wiring diagram
Product code for heat meter Conotec series FOX-1PH
Above are a few Conotec temperature controllers that do not have sensors included in the product box. These devices have a large operating temperature range from -50℃ to 400℃. FOX-1PH, FOX-1PH-D use a PT100 type probe while FOX-1CH and FOX-1CH-D use a K(CA) probe.
III) APPLICATION OF FOX-1PH
Conotec FOX-1PH temperature controller is widely used in production systems that use temperature with the desire to control the amount of heat and the level of heat source accurately.
The heat meter FOX-1PH with simple design, easy to install and install is widely used in livestock and crop farming systems, applied in agricultural farming models such as greenhouses, farms and even laboratory,...
Contact now to buy the Conotec FOX-1PH Temperature Controller and other Conotec Heat Meters at Amazen:
Sale: 0938 072 058 | Hot line: 0934 399 068 | Email: amazen@amazen.com.vn
Refer to the FOX-1PH Manual for more information
Mã :