I) TECHNICAL SPECIFICATIONS OF CONOTEC FOX-D1004 TEMPERATURE CONTROLLER
Replaced by: DSFOX-XD20Conotec FOX-D1004 temperature controller includes typical parameters:
Product code | FOX-D1004 |
Function | Heating/Cooling function |
Dimensions (mm) | 77(W) × 35(H) × 77(D) |
Installation hole size (mm) | 71(W) × 29(H) |
Active heat range | -40.0~90.0℃ |
Temperature displayed | -50.0~100.0℃ |
Transducer type (sensor) | Diode (3 meter wire) |
Display method | 7-segment 3-digit LED |
Correct display | ±1% RDG ± 1 digit |
Control method | ON/OFF control |
Control output | 2 Relay (1C: 250VAC 2A ,1a:250VAC 2A) - 1R: temperature
2R: temperature
|
Power supply | 230VAC 50/60Hz (other power sources: 12V or 24V AC/DC ±10%) |
Program setting | Use the Set/Up/Down keys |
Scope of operation | 20%RH~99%RH |
Environment_Ambient temperature | 0 to 55℃ (32 to 131OF) |
Environment Ambient humidity | 35 to 80% RH |
Certificate | CE |
Weight (Including box) | 260g |
Guarantee | Genuine 12 months |
II) OVERVIEW OF CONOTEC FOX-D1004 TEMPERATURE CONTROLLER
The Conotec FOX-D1004 temperature controller has an operating temperature range of -40.0~90.0℃, extremely low error.With this temperature control meter device, it not only helps to measure but also completely control the environmental temperature.The temperature sensor FOX-D1004 with two setting values corresponding to two relay outputs helps the heat control process be accurate and as desired. Set the program using 3 keys Set/Up/Down
Main function:
- 2 temperature settings for controlling heating or cooling
Adjust output delay time; Calibrate current temperature
Lock adjustment function (programmable function)
Main parameters:
- Dimensions WxDxH: 77×35×77 (mm)
Operating temperature range: -40.0~90.0℃
Display method: 7-segment 3-digit LED
Control method: ON/OFF control
Control output: 2 Relay (1C: 250VAC 2A, 1a: 250VAC 2A)
Power supply : 230VAC 50/60Hz (other power supply: 12V or 24V AC/DC ±10%)
Advantages of Conotec FOX-D1004 temperature controller:
- FOX-D1004 is designed with compact size and easy installation
Comes with 1 Diode temperature probe sensor with 3m long cord
Accurate display, low error: ±1% RDG ± 1 digit
Possesses temperature measurement and control functions
Calibrate current temperature with high accuracy
Obtained certification: CE
Operating principle of Conotec FOX-D1004 temperature controller:
The operating principle of the Conotec FOX-D1004 temperature controller can be understood as follows:
The Diode temperature sensor probe will be exposed to the environment, the signal will be transmitted to the processing unit, calculating and determining the temperature at the point of contact. The results will be displayed on the LED screen.
Then the FOX-D1004 controller will trigger the output if the temperature of the measuring environment exceeds the set value (Can be triggered when within the delay range without needing the set value - if the user has set set delay band).
Conotec FOX-D1004 temperature controller dimensions:
FOX-D1004 có kích thước ngoài là WxDxH: 77×35×77 (mm)
And the installation hole size is: 71(W) × 29(H) mm
The FOX-D1004 temperature controller and other Conotec temperature controllers are all designed with a compact size, helping to maximize installation & working space.
FOX-D1004 temperature control meter is manufactured by Conotec which is a Korean international company. Conotec was founded in 1990 and has now become one of the leading manufacturers in the field of technology, electrical equipment, and automation equipment. The most commonly used and trusted products of this brand in Vietnam are temperature & humidity controllers, temperature sensors, and temperature control clocks.
Conotec FOX-D1004 temperature controller wiring diagram:
How to connect:
- Wire D1 (power cord) to pins: 11, 9 and 3 on the device. Connect D1 to pin 11
Wire D2 (power wire) connects to pin 12, D3 (power supply for load 1), D4 (power supply for load 2).Our load can be a compressor, a light bulb, a dehumidifier, a resistor, etc.
The remaining wires D5 (powering load 1), D6 (powering load 2) are connected to pins 10 and 4 of the FOX-D1004 thermostat, respectively.
III) CONOTEC AUTOMATIC TEMPERATURE CONTROLLER PRODUCT SELECTION CODE
Conotec is currently offering the FOX-D1004 as an automatic thermal controller. Operating temperature range is from -40.0~90.0℃. Diode heat detector. The output controls 2 relays and has the function of heating & cooling simultaneously.
IV) APPLICATION OF CONOTEC FOX-D1004 TEMPERATURE CONTROLLER
The Conotec FOX-D1004 temperature controller is commonly used in agricultural cultivation models, farms and laboratories,... The most notable problems include:
- Control heating or cooling equipment such as boilers, refrigeration compressors, ... one convenient device with 2 loads (2 outputs).
Application in animal husbandry: egg incubation (chickens, ducks, ...); heating for livestock, poultry,...
Mã :