No. of channel | 2-channel |
Sampling cycle | 50ms(2-CH or 4-CH synchronous sampling) |
Input type_TC | K(CA), J(IC), E(CR), T(CC), B(PR), R(PR), S(PR), N(NN), C(TT), G(TT), L(IC), U(CC), Platinel II |
Input type_RTD | DPt100Ω, JPt100Ω, DPt50Ω, Cu100Ω, Cu50Ω, Nikel 120Ω 3-wire type(permissible line resistance max. 5Ω) |
Input type_Analog | Voltage: 0-100mVDC , 0-5VDC , 1-5VDC 0-10VDC
Current: 0-20mA, 4-20mA |
Input type_CT | 0.0-50.0A(primary current measurement range) ※CT ratio=1/1000, Measured accuracy: ±5% F.S. ±1-digit |
Input type_Digital inputs | Connect input: ON - max. 1kΩ, OFF - min. 100kΩ
Solid-state input: ON - max. residual voltage 0.9V, OFF - max. leakage current 0.5mA
Outflow current: approx. 0.3mA per input |
Control method | Heating, cooling, heating & cooling: ON/OFF, P, PI, PD, PID control |
Control output_SSR | Max. 12VDC ±3V 20mA |
Control output_Current | Selectable DC 4-20mA or DC 0-20mA(load resistance max. 500Ω) |
Output_Alarm | 250VAC~ 3A 1a |
Communication | Modbus RTU |
Proportional band | RTD/Thermocouples: 1 to 999℃/℉ (0.1 to 999.9℃/℉), analog: 0.1 to 999.9 digit |
Integral time | 0 to 9999 sec |
Derivative time | 0 to 9999 sec |
Control period | 1.0 to 120.0 sec |
Manual reset | 0 to 100%( 0.0 to 100.0%) |
Insulation type | Double insulation or reinforced insulation(mark: , dielectric strength between the measuring input part and the power part: 1kV) |
Unit weight (packaged weight) | ≈ 173 g (≈ 246 g) |
Power supply | 24VDC |
Allowable voltage range | 90 to 110% of rated voltage |
Power consumption | Max. 5W(for max. load) |
Display method | None-parameter setting and monitoring is available at external devices(PC, PLC, etc.) |
Memory Protection | ≈ 10 years (non-volatile semiconductor memory type) |
Insulation resistance | 100MΩ(at 500VDC megger) |
Dielectric strength | Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
Vibration | 0.75 mm amplitude at frequency of 5 to 55 Hzin each X, Y, Z direction for 2 hours |
Noise immunity | ±0.5kV the square wave noise (pulse width: 1㎲) by the noise simulator |
Environment_Ambient temperature | -10 to 50℃, storage: -20 to 60℃ |
Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
Protection structure | IP20(IEC standard) |