EP50S8-256-2F-P24 is a type of photoelectric encoder capable of converting rotational or linear motion into electronic pulse signals, enabling the measurement of position, speed, and direction of motion of an single object.
Outer shaft diameter: Ø8mmMaximum receiving frequency: 20kHZAllowable resolution: 3000rpmStarting torque: Max. 70gf.cm(max. 0.0069N.m)Minimum resolution:256P/RRotation direction: CWControl output: PNP open collector circuit
Outer shaft diameter
Ø8mm
Maximum receiving frequency
35kHZ
Maximum resolution allowed
3000rpm
Starting touge
Max. 70gf.cm(max. 0.0069N.m)
Resolution
256P/R
Code open
Binary code
Sense of rotation
CW
Output source control
PNP open receiver circuit
Power supply
12-24VDC ±5%(sóng P-P: max. 5%)
Connection cables
Shaft cable
Protective instruction
IP65(IEC standard)
Temperature allowed
Form -10 to 70℃, storage: -25 to 85℃
Moisture allowed
From 35 to 85%RH, storage: 35 to 90%RH
Items additional
bracket and coupling
Weight
approximately 482g
Minimize impact on the environment: Therefore, with mechanical encoders, photoelectric encoders are less affected by dust, grease, temperature and other environmental factors.No subsequent mechanical stress: The operating principle is based on light and optical sensors so there are no mechanical parts in direct contact, reducing friction and wear, extending service life.
CNC machine: In CNC machine tools, Encoder exactly provides position information for all of rotation, helping processing materials with high- precisely.The precise tracking of encoder rotations ensures accurate joint operation in the robot.