Sensing type : Through-beam typeHysteresis(distance) : ≤0.05mmResponse time : Light ON: Max. 20㎲,Dark ON: Max. 100㎲Control output : PNP open collectorConnection : Cable type
Sensing type
Through-beam type
Sensing distance
5mm
Sensing target
Opaque
Min. sensing target
≥Ø0.8mm×2mm
Hysteresis(distance)
≤0.05mm
Response time
Light ON: Max. 20㎲,Dark ON: Max. 100㎲
Response frequency
2kHz
Light source
Infrared LED
Peak emission wavelength
940nm
Operation mode
Light ON/Dark ON(set by control wire)
Indicator
Operation indicator (red LED)
Weight
Approx. 50g
Power supply
5-24VDC ±10%(ripple P-P : max. 10%)
Current consumption
Max. 30mA
Control output
PNP open collector
Load voltage
≤30VDC
Load current
Max. 100mA
Residual voltage
NPN: ≤1.2VDC, PNP: ≤ 1.2VDC
Protection circuit
Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
Insulation resistance
≥20 MΩ (250 VDC megger)
Noise immunity
The square wave noise (pulse width: 1㎲) by the noise simulator ±240VDC
Dielectric strength
1,000VAC 50/60Hz for 1 minute
Vibration
1.5mm amplitude (max. acceleration 196m/s²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours
Shock
15,000 m/s² (approx. 1,500G) in each X, Y, Z direction for 3 times
Environment_Ambient illumination
Fluorescent lamp: Max. 1,000lx(received illumination)
Environment_Ambient temperature
-20 to 55℃, storage : -25 to 85℃
Environment_Ambient humidity
35 to 85% RH, storage: 35 to 85% RH
Protection structure
IP50 (IEC standard)
Connection
Cable type
Connection type
Ø3 mm, 4-wire, 1m
Core
AWG28 (0.08mm)
Material
Case: PBT, Sensing part: PC
Various shapes available for installation flexibility (K, T, V, L, Y, F, R, TA types)
Minimize detection errors and improved visibility
- Sensing side and body level has been improved to minimize detection errors occurring from foreign substances- Added operation indicators viewable from multiple directions
Indicator ON when light received and indicator ON when light blocked models available
High shock and vibration resistance
Switch between Light ON and Dark ON modes using control terminal/wire
High-speed response frequency: 2kHz
PCB Shipping Line
Milling machine
Laser engraving on semiconductor parts
Manufacture of portable LCDs