Model | DPS-30S-05 | DPS-30S-12 | DPS-30S-15 | DPS-30S-24 |
Output | Rated output voltage | 5 V | 12 V | 15 V | 24 V |
Rated output current | 6 A | 2.5 A | 2 A | 1.25 A |
Rated power output | 30 W |
Peak current | 7.2 A | 3.0 A | 2.4 A | 1.5 A |
Circuit voltage fluctuation rate | ±0.5 % | ±0.5 % | ±0.5 % | ±0.5 % |
Load voltage fluctuation rate | ±1 % | ±1 % | ±1 % | ±1 % |
Ripple | 80 ㎷ p-p max | 120 ㎷ p-p max | 120 ㎷ p-p max | 150 ㎷ p-p max |
Ambient temperature fluctuation | ±1 % | ±1 % | ±1 % | ±1 % |
Running time | 200 ㎳ max (110 V AC, Io=100 %) |
Remaining time | 10 ㎳ min (110 V AC, Io=100 %) |
Voltage fluctuation range | 4.6 - 5.3 V | 11.2 - 13.7 V | 13.6 - 16.1 V | 22.6 - 27.6 V |
Voltage setting range | ±1 % max (Rated output voltage) |
Input | Input voltage | 100 - 240 V AC (※ Designed voltage range : 85 - 264 V AC) |
Input frequency | 50 - 60 ㎐ (47 - 63 ㎐) |
Current (A) | 110 V AC | 0.53 | 0.53 | 0.53 | 0.53 |
220 V AC | 0.3 | 0.3 | 0.3 | 0.3 |
Efficiency | 220 V AC | 82 % | 85 % | 86 % | 86 % |
Inrush current | 110 V AC | 20 A Typ. (Ta=25 ℃, Io=100 % at Cold start) |
220 V AC | 40 A Typ. (Ta=25 ℃, Io=100 % at Cold start) |
Leakage current | 110 V AC | 0.35 ㎃ max |
220 V AC | 0.75 ㎃ max |
Protection function | Over current protection | Protective function performed within 110 ~ 200 % of the rated output current |
Over voltage protection | 6.8 - 7.9 V | 14.5 - 17.2 V | 17.5 - 20.5 V | 30 - 36 V |
Overheating protection | Protection circuit is in operation when PWM controller's junction temperature is over 135~140℃. |
Protection of output short | Auto Re-start |
DC OK Signal | Green LED (ON when output voltage is normal) |
ETC | Dielectric strength | 2,700 V AC for 1 min, Detection current =10 ㎃, (Input – Output) |
1,500 V AC for 1 min, Detection current = 10 ㎃, (Input . FG) |
500 V AC for 1 min, Detection current = 10 ㎃, (Output – FG) |
500 V AC for 1 min, Detection current = 10 ㎃, (Output . DC OK) |
Insulation resistance | 50 ㏁ min. (Input – Output, FG), (Output – FG, DC OK) |
Environment | Ambient temperature | - 25 ~ +50 ℃ (Refer to the derating curve of output load ) |
Ambient humidity | 20 ~ 90 % RH (With no condensation) |
Storage temperature | - 40 ~ +85 ℃ (With no condensation) |
Vibration resistance | 10 - 55 ㎐, peak amplitude 0.375 ㎜, 2 hours for each of 3 directions (DIN Rail is installed without applying voltage) |
Shock resistance | 150 ㎨, 3 times for each of 6 directions . (State of packing) |
Weight | 262 g | 242 g | 242 g | 244 g |