I) TECHNICAL SPECIFICATIONS OF CONOTEC FOX-2C1 TEMPERATURE CONTROLLER
The Conotec FOX-2C1 temperature controller has the following main parameters:
FOX-2C1 parameters
Product's name | Conotec FOX-2C1 temperature controller |
Product code | FOX-2C1 |
Operating temperature range | 0~1200℃ |
Probe (sensor) | CA(K) |
Correct display | ±1% rdg ± 1 digit |
Way out | 1 Relay (1C 250 VAC 2A) |
Control method | ON/OFF |
Control mode | - Using heating and cooling controls
Adjust output delay time/Align current temperature
|
Power supply | 100~240VAC 50/60Hz |
Program setting | Use the Set/Up/Down key |
Operating environment (Temperature, Humidity) | 0~55℃(32~131℉), 35~80%RH |
Certification | CE |
Guarantee | 12 months from manufacturer |
II) OVERVIEW OF THE CONOTEC FOX-2C1 TEMPERATURE CONTROLLER
The Conotec FOX-2C1 temperature controller operates in the temperature range of 0~1200℃, uses a (CA)K type temperature probe and power supply: 100~240VAC, 1 Relay output.
FOX-2C1 temperature controller is designed with compact size and easy to assemble, so it is extremely easy to assemble. This device uses both heating and cooling control functions and is set up with 3 Set/Up/Down keys on the front.
Conotec FOX-2C1 thermostat
Operating principle of the heat meter FOX-2C1
Conotec's FOX-2C1 heat meter is a device used to adjust the temperature of heating devices such as boilers, furnaces, etc. by comparing the temperature measured from the sensor with the temperature detected by the user. Use setup. And this temperature regulator will calculate and use the relay/voltage/current output to control other actuators so that the process temperature is closest to the set temperature.
How FOX-2C1 works
Advantages of FOX-2C1
The FOX-2C1 is a PID temperature controller used to provide proportional control with integral and derivative (PID). This controller will combine proportional control with two additional adjustments to help the unit automatically compensate for changes in the system. Typically applied to systems where load changes frequently and the controller automatically compensates for frequent changes in set point, available energy, or controlled mass to:
- Operate equipment safely.
Reduce energy consumption, cut costs, manage manpower with essential functions, realize temperature control with PID algorithm.
Maintain thermal amenities.
Monitor systems well.
Compact design saves installation space, simple structure makes connection easy.
High sensitivity and precise operation, showing results quickly.
Operates in harsh environmental conditions.
Clearly identify problems for equipment maintenance, high mechanical durability and long service life.
FOX-2C1 top design
Device dimensions
- FOX-2C1 temperature controller is designed with size in mind 79(W) × 35(H) × 77(D) mm
- The size of the cabinet face hole is 71(W) × 29(H) mm
- In quantity (including box) is 164g
Dimensional drawing of FOX-2C1 along with the size of the cabinet face hole
FOX-2C1 temperature sensor connection diagram
We send to customers the standard connection diagram of the Conotec FOX-2C1 temperature controller.Please rely on the diagram above to get the most accurate wiring for FOX-2C1.
- Sensor (probe): + (white) wire to pin 1; Wire – (black) to pin 2
- Source:
- Main source: on pins 11 and 12.
- Power supply to the common pin of the relay (output): use a short piece of wire connected from pin 12 to number 7.
Load (compressor, heating resistor, light bulb, fan, ...): on pins 6 and 11.
III) CONOTEC FOX TEMPERATURE CONTROLLER PRODUCT SELECTION CODE
Based on the table explaining the product codes of some Conotec FOX temperature controllers with the same size 77x35x77 that Amazen provides below, customers can choose for themselves the product with suitable parameters and characteristics. best suited to usage needs.
IV) APPLICATION OF CONOTEC FOX-2C1 TEMPERATURE CONTROLLER
Conotec FOX-2C1 temperature controller is widely used in processes that require temperature control:
- In agricultural farming models such as greenhouses, farms, etc.
In the laboratory.
Application in animal husbandry: incubation of eggs (chickens, ducks, ...); heating for livestock, poultry, ...
In industry: controlling heating or cooling equipment such as boilers, refrigeration compressors, ...
V) HOW TO USE CONOTEC FOX-2C1 TEMPERATURE CONTROLLER
Above is an illustration of the functions of the buttons, the meaning of the indicators displayed on the screen, and how the user can set the set temperature and program for the FOX-2C1 temperature controller.
Contact now to buy the Conotec FOX-2C1 Temperature Controller and other Conotec Temperature Controllers at Amazen:
Sale: 0938 072 058 | Hot line: 0934 399 068 | Email: amazen@amazen.com.vn
Tham khảo thêm FOX-2C1 Manual pdf bản Tiếng Anh